We use cookies to enhance your experience. By continuing to browse this site you agree to our use of cookies. More info.
The latest research in the Journal of Materials Research and Technology is focused on the evaluation of microstructural properties and toughness of industrial electric resistance welding (ERW) equipment.
Study: A Significant Toughness Enhancement, And Microstructural Evolution Of An Electric Resistance Welded (ERW) Microalloyed Steel. Image Credit: SARIN KUNTHONG/Shutterstock.com
The research has successfully demonstrated that the implementation of an enhancement treatment would be beneficial for significant improvement in mechanical properties, particularly the toughness of steel.
High-strength steel alloys usually contain elements such as Molybdenum, Titanium, etc., and are readily used in the oil and gas industry particularly in the transportation engineering department. Apart from this, the automotive industry, manufacturing industry, industries related to cranes, coasters, and rollers, etc. along with other structures that are specifically designed to operate under the high value of stresses requiring superior mechanical properties utilize them readily.
Inferior material qualities, inappropriate design, faulty engineering or fabrication procedures, unequal or excessive loads, and pre-existing defects can contribute to catastrophic failures. Understanding the strength and toughness properties of a certain material is frequently the best way to overcome these issues.
Toughness is the ability of the material to absorb energy before undergoing fracture. In other words, it could be the material’s ability to withstand the shock up to fracture. Toughness is different from hardness and strength.
a) pipeline jointing by ERW process. b) a snapshot of ERW process used for the welding of X52 plate. Image Credit: Anijdan, S. M et al., Journal of Materials Research and Technology
Hardness could easily be termed as the material’s ability to withstand friction or prevent scratching. Strength could be termed as the force required to deform the material and toughness as mentioned above is its ability to resist any sort of fracture.
Microstructural engineering is achieved to reach adequate standards of mechanical characteristics by maintaining the balance of displacement and temperature during the annealing process, also known as thermomechanical control processing. Stopping recrystallization by generating titanium carbonitrides is the single most important phenomenon to achieve this procedure.
In the industrial sector, the electric resistance welding (ERW) technique is used to manufacture large-scale pipes since it has a reasonably high efficiency while maintaining an acceptable total production cost. Cold forming is used in this procedure to bend different plate thicknesses before the application of ERW equipment and without the use of welding materials. Brittle phases are formed as a result of the quick cooling used in the ERW process.
Enhancing toughness values has a significant design impact since ERW pipe with appropriate toughness qualities might be utilized for seamless purposes.
The latest study showed that the rapid cooling rate following the ERW operation resulted in a greater number of these second phases, albeit with smaller sizes and a more scattered arrangement. Typically, the comparatively greater hardness aspects of steel were obtained during the quick cooling phase following the welding operation.
Scanning Electron Microscopy revealed a finer microstructural characteristic, which might suggest improved mechanical qualities, notably toughness. There was a difference observed in the hardness value of the base metal and welded zone.
OM images of X52 steel, a) OM of weld zone of normalization stage, b) HAZ area of normalization, c) SEM image of the WZ of the normalization stage, d) OM of the weld zone of second stage treatment, d) HAZ area of second stage, f) SEM image of the WZ of the second stage (arrows show M/A constituents). Image Credit: Anijdan, S. M et al., Journal of Materials Research and Technology
Along with this, a difference observed in the grain size resulted in a major difference in mechanical properties. The results were an indication that an even higher cooling rate would result in the formation of harder phases resulting in an improvement of mechanical properties.
A significant point raised is that there is also variance in the values within each thermal treatment process, which might be attributed to variations in the microstructural characteristics caused by each heat treatment method (i.e. size and configuration).
The variation in heat treatment temperatures and the cooling rate used alters the precipitates' properties, particle size distribution, and phase features. These modifications may result in increased toughness during the second step of heat treatment. The results showed that impurities did not affect the fracture toughness of steel.
Resistance welding is advantageous, yet its equipment is costly and it has its limitations for high conductive materials. The requirement of high electric power is also a major problem.
Microalloyed steel is implemented for various purposes in different industries, yet a few disadvantages still exist. The drawbacks are that the ductility and hardness are not as good as in quenched and tempered (Q&T) steels. They must also be heated to a temperature high enough to dissolve all of the alloys; after forming, the material must be swiftly cooled to 540 to 600 °C.
In short, the research has thoroughly assessed the microstructure and toughness of ERW micro-alloyed steel; these steel alloys are used readily in various industries such as the aerospace, metallurgical, and oil and gas transportation industries.
Anijdan, S. M., Khafri, M. A., Khoshakhlagh, A. R., Eivani, A. R., Park, N., & Jafarian, H. R. (2021). A Significant Toughness Enhancement, And Microstructural Evolution Of An Electric Resistance Welded (ERW) Microalloyed Steel. Journal of Materials Research and Technology. https://www.sciencedirect.com/science/article/pii/S2238785421012928
Disclaimer: The views expressed here are those of the author expressed in their private capacity and do not necessarily represent the views of AZoM.com Limited T/A AZoNetwork the owner and operator of this website. This disclaimer forms part of the Terms and conditions of use of this website.
Ibtisam graduated from Institute of Space Technology, Islamabad with a B.S. in Aerospace Engineering. During his academic careers, he has worked on several research projects and has successfully managed several co-curricular events like International World Space Week and International Conference on Aerospace Engineering. Having one English Prose competition during his undergraduate level, Ibtisam has always been keenly interested in research, writing and editing. Soon after his graduation, he joined the AzoNetwork as a freelancer to sharpen his skills. Ibtisam loves to travel especially visiting the countryside. He has always been a sports fan and loves to watch tennis, soccer and cricket. Born in Pakistan, Ibtisam one day hopes to travel all over the world creating strong bonds of friendships and spreading the message of peace and love.
Please use one of the following formats to cite this article in your essay, paper or report:
Abbasi, Ibtisam. (2021, November 22). Microstructure and Toughness of an ERW Microalloyed Steel. AZoM. Retrieved on March 31, 2022 from https://www.azom.com/news.aspx?newsID=57418.
Abbasi, Ibtisam. "Microstructure and Toughness of an ERW Microalloyed Steel". AZoM. 31 March 2022. <https://www.azom.com/news.aspx?newsID=57418>.
Abbasi, Ibtisam. "Microstructure and Toughness of an ERW Microalloyed Steel". AZoM. https://www.azom.com/news.aspx?newsID=57418. (accessed March 31, 2022).
Abbasi, Ibtisam. 2021. Microstructure and Toughness of an ERW Microalloyed Steel. AZoM, viewed 31 March 2022, https://www.azom.com/news.aspx?newsID=57418.
Do you have a review, update or anything you would like to add to this news story?
AZoM speaks to Dr. Spence Macdonald from ABOzymes about his discovery of a novel biopolymer, acholetin, synthesized from a bacterial enzyme.
AZoM speaks with Dr. Rajashekar Badam from JAIST about his recently formulated method for anode fabrication that could pave the way to the very fast charging of lithium-ion batteries.
AZoM speaks to Michael Jewett, a researcher at Northwestern University, about a novel process using bacteria to capture CO2 and convert it into the useful commercial chemicals acetone and isopropanol. This could bring us closer to a circular bioeconomy in the chemical sector.
Discover ODIN, a compact deep UV Raman spectrometer by IS-Instruments.
This product profile outlines how the Carousel 12 Plus Reaction Station is used as an effective personal synthesis station.
IKA has released the new reactor system EasySyn which is the only reactor system available on the market where all components are available from a single source.
This article provides an end-of-life assessment of lithium-ion batteries, focusing on the recycling of an ever-growing amount of spent Li-Ion batteries in order to work toward a sustainable and circular approach to battery use and reuse.
This article provides an overview of the materials that are used to produce photovoltaic cells for the production of renewable energy, as well as new research that proposes the use of novel materials.
This article considers laser-based 3D printing, or additive manufacturing, looking at different types of lasers in the fabrication process.
AZoM.com - An AZoNetwork Site
Owned and operated by AZoNetwork, © 2000-2022