High pressure resistant large diameter stainless steel seamless pipe 904L stainless steel pipe

High pressure resistant large diameter stainless steel seamless pipe 904L ss pipeMaterialMonel/Inconel/Hastelloy/Duplex Steel/PH Steel/Nickel AlloyShapeBar,Pipe/tube,sheet/plate,Forging,Ring,Coil,Flange,Ribbon,Square pipe/bar,GradeDuplex: 2205(UNS S31803/S32205),2507(UNS S32750),UNS S32760(Zeron 100),230

Featured Products

High pressure resistant large diameter stainless steel seamless pipe 904L ss pipe

MaterialMonel/Inconel/Hastelloy/Duplex Steel/PH Steel/Nickel Alloy
ShapeBar,Pipe/tube,sheet/plate,Forging,Ring,Coil,Flange,Ribbon,Square pipe/bar,
GradeDuplex: 2205(UNS S31803/S32205),2507(UNS S32750),UNS S32760(Zeron 100),2304,904L,200 Series,300 Series,400 Series,600 Series
Hastelloy: Hastelloy B/ -2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N/g;etc
Inconel 600/601/602CA/617/625/713/718/738/X-750;ETC
Incoloy: Incoloy 800/800H/800HT/825/925/926;etc
GH: GH2132,GH3030,GH3039,GH3128,GH4180,GH3044,etc
Monel: Monel 400/K500/R405,etc
Nitronic: Nitronic 40/50/60;etc
Nimonic: Nimonic 75/80A/90/A263 ;etc
SpecificationWire: 0.01-10mm
Strip: 0.05*5.0-5.0*250mm 
Bar: φ4-50mm;Length 2000-5000mm
Pipe: φ6-273mm;δ1-30mm;Length 1000-8000mm
Sheet: δ 0.8-36mm;Width 650-2000mm;Length 800-4500mm
Product 
Characteristics
1.According to the preparation process can be divided into deformation superalloys, 
casting superalloys and powder metallurgy superalloys.
2.According to the strengthening mode, there are solid solution strengthening type, precipitation 
strengthening type, oxide dispersion strengthening type and fiber strengthening type, etc..
InspectionISO,SGS,BV and so on.
PackagingAll our products are packed, stored, transported according to the international regulation.Or as customer's requirement provide special packing.

310s STAINLESS STEEL

310S stainless steel has good high temperature resistance, temperature more than 800, began to soften, the allowable stress began to continue to reduce, the highest operating temperature 1200ºC.Nickel (Ni), chromium (Cr) content is high, has good resistance to oxidation and corrosion resistance, acid and alkali resistance, high temperature performance, high temperature resistant steel pipe is dedicated to manufacturing occasions such as the electric heating furnace tubes, stainless steel after the increase of carbon content in austenite size, due to its solid solution strengthening effect strength was improved, the chemical composition of stainless steel austenite size features based on chromium, nickel, add, tungsten molybdenum, niobium and titanium elements, due to its organization is face-centered cubic structure, thus has high strength and creep at high temperature strength.

 
Surface finishCharacteristics & Application
NO.1Hot-rolled surface,annealed and pickled,can be used as cold-rolling material,industial tanks and chem i cal devices.
NO.2DCold-rolled, an nealed and pick led with out skinpassing the dull prod ucts can be used as auto mo bile parts, building materrials and pipings.
NO.2BThe surface brightness and flatness of NO.2B is better than NO.2D. Then through a special
surfacetreament to improve its mechamical properties, N02B could nearly satisfy com pre hen sive uses.
NO.3Polished with abra sive belt of grit #100#120,have bet ter bright ness with dis con tin u ous coarse stria, used as in ner and exter nal or na ments for building, elec tri cal ap pli anc es and kitchen uten sils etc.
NO.4Polished with abrasive belt of grit #150#180, have better brightness with discontinuous coarse stria, but thinner than NO.3, are used as bathtud buildinginner and external ornaments electrical appliances, kitchen utensils and food processing equipment etc.
HLPolished with abrasive belt of grit #150-320 on the No.4 finish and has continuous streaks,
mainly used as building ornaments, elevators, door of building, frontal plate etc.
BACold rolled, bright an nealed and skin passed, the prod uct has ex cel lent bright ness and good re flex iv i ty like mirror, used for lectrical appliances, mirror, kitch en apparatus, or na ment ma te ri als etc.

Chemcial Composition (%wt)
Density7.9 g/cm3
Tensile strength σb (MPa)515
Yield Strength 0.2% Offset205
Elongation δ5 (%)35
Hardness187


pictures of products

High Pressure Resistant Large Diameter Stainless Steel Seamless Pipe 904L Ss Pipe
High Pressure Resistant Large Diameter Stainless Steel Seamless Pipe 904L Ss Pipe
High Pressure Resistant Large Diameter Stainless Steel Seamless Pipe 904L Ss Pipe


High Pressure Resistant Large Diameter Stainless Steel Seamless Pipe 904L Ss Pipe
High Pressure Resistant Large Diameter Stainless Steel Seamless Pipe 904L Ss Pipe
High Pressure Resistant Large Diameter Stainless Steel Seamless Pipe 904L Ss Pipe
High Pressure Resistant Large Diameter Stainless Steel Seamless Pipe 904L Ss Pipe
 

FAQ

Q: Are you trading company or manufacturer ?

A: We are manufacturer.

Q: Do you provide samples ? is it free or extra ?

A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: How long is your delivery time?

A: Generally it is 7-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

Any further questions, please feel free to contact us! 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours