Raw material from POSCO
stainless steel tube for heat exchanger
Specifications:
1) Diameters: 4 101.6mm
2) W.T.: 0.4 3.0mm
3) Grades: 316L/304/304L/310S,etc.
4)standard:GB/ISO/EN/ASTM/JIS,etc.
5)application range:widely use in the foodstuff,medical equipment,power,boiler,cooler,auto,condenser etc.
6)packing: inner packing:1 pc/plastic bag;outer packing:bundles in weaving bags or in plywooden case.
1,Size accuracy
The outside path admission deviation that solder take care of includes the elliptical park a cent I , II two class, see the table 3, table 4. The thick the deviation of admission( do not include the weld sew) in wall of the weld tube is for ruling the wall thick 10% of ±, but minimum admission deviation is the 0.02 mms of ±.
The weld takes care of of settle Chinese foot length as 3 ms~9 ms, general settle the Chinese foot with the 6 ms.
The weld takes care of of settle the Chinese foot length in usually length, its the deviation of admission is the 5 mms of ±.
Adopt partial the degree of flinch in a the tube of weldfor keeping the Chinese foot measurement should not very in 2.0 mms.
2,The machine function sees the table 5
table 5
stainless steel tube for heat exchanger
Specifications:
1) Diameters: 4 101.6mm
2) W.T.: 0.4 3.0mm
3) Grades: 316L/304/304L/310S,etc.
4)standard:GB/ISO/EN/ASTM/JIS,etc.
5)application range:widely use in the foodstuff,medical equipment,power,boiler,cooler,auto,condenser etc.
6)packing: inner packing:1 pc/plastic bag;outer packing:bundles in weaving bags or in plywooden case.
1,Size accuracy
The outside path admission deviation that solder take care of includes the elliptical park a cent I , II two class, see the table 3, table 4.
IOutside path in class deviation mm table 3 Outside path inII class deviation mm table 4
Outside pathAdmission deviation
<25±0.10
≥25~38.1±0.15
>38.1~50±0.20
≥50~63.50.25
>63.5~76±0.30
≥76~102±0.40
Outside pathAdmission deviation
≤10±0.15
>10~32±0.20
>32~50±0.30
>50±0.8%
The weld takes care of of settle Chinese foot length as 3 ms~9 ms, general settle the Chinese foot with the 6 ms.
The weld takes care of of settle the Chinese foot length in usually length, its the deviation of admission is the 5 mms of ±.
Adopt partial the degree of flinch in a the tube of weldfor keeping the Chinese foot measurement should not very in 2.0 mms.
2,The machine function sees the table 5
table 5
Steel numberCard numberThe heat handles
Make degree
The anti- pulls the strength
MPaAccept defeat the strength
MPaExtension rate%Degree of hardnessHRB
Make degree
The anti- pulls the strength
MPaAccept defeat the strength
MPaExtension rate%Degree of hardnessHRB
0Cr19N19304≥1010°C
Nasty and cold≥520≥20540≤90
Nasty and cold≥520≥20540≤90
00Cr19Ni11304L" "≥480≥17540≤90
0Cr17Ni12M02316" "≥520≥20540≤90
0Cr17Ni14M02316L" "≥480≥17540≤90
0Cr18Ni11Ti321≥920°C
Nasty and cold≥520≥20540≤90
Nasty and cold≥520≥20540≤90